The diesel heater market has evolved with time, and now you can find different types of diesel heaters for your commercial vehicle from various brands at reasonable prices. However, things will become a little challenging or tricky when it comes to installing a diesel heater. Such heaters come with multiple parts, and to make them work properly, you need to ensure that all the parts are installed properly. A small mistake during the installation can make your heater develop issues in the future. To help you out with this, we have listed down some important and effective DKSI diesel heaters installation tips for you, and those tips can be used for diesel heaters from other brands.
Don’t Use It in an Enclosed Space
During the installation of the heater, people place the combustion exhaust pipe outside the compartment. This way, you can prevent fumes generated by exhaust pipes from leaking. With time, the gasket present between the mounting plate and heater will deteriorate, and it may cause fumes to get inside your tuck’s cabin. Make sure the enclosed spaces have sufficient ventilation and leave a gap while installing your diesel heater.
Distance of the Heater from the Blockage
While some people prefer to connect the air outlet to the ducting hose, some vehicle owners don’t prefer to do that. In such a case, you need to make sure that there is no blockage or obstacle before your heater. Place it around 10cm distance from the outlet. If not, then you may develop an E03 error.
Make Sure the Motor Is Not Ceased
Based on the heater’s construction, during transportation, your heater may lead to jostling. Besides, it may change the position of your heater core, and the impeller may not turn on. Once you are unpacked the heater, turn on the impeller and ensure that it is rotating. Then, after the installation, turn on the diesel impeller again to check it is not ceased. If it is not rotating, try to adjust the screws located heater’s bottom.
Check the Control Panel’s Thermostat
Every control panel of a diesel heater comes with a thermostat, and it is generally utilized to measure the temperature. While installing the heater, ensure that the panel is placed away from your diesel heater outlet as it produces hot air, and that will affect the data reading process of the control panel.
Exhaust Pipe Placement
While installing DKSI diesel heaters, you should make sure that the exhaust pipe is heading backward. Otherwise, when you drive, the exhaust fumes will go back into your heater. Always connect the plugs gently to avoid displacement of plug pins.
What To Do If the Heater Doesn’t Fire Properly?
Well, such fault generally arises when there is air in the fuel line. Air can affect the supply of fuel. This, in turn, will make your heater fire improperly. To solve such an issue, once you are done with installing the heater, you should remove the fuel line. Then turn on the heater to remove fuel from the pump. Once done, you can connect the fuel line to DKSI diesel heaters. As per the experts, if there is not sufficient fuel in your tank, then you may need to follow these steps when you refill it in order to remove air. Even though the process of installing diesel heaters is a little complicated, by keeping these things in mind, you can avoid any possible issues in the future. And don’t forget to take an expert’s help if you have any confusion.
Read also: Some Useful Diesel Heater Installation Tips to Keep in Mind
