Description
The PH20A heater is designed to provide cabin heating for trucks, off-highway equipment, RVs and boats by using on-board diesel fuel and battery systems. Operation is simple and the heater provides a safe and reliable alternative to engine idling or need for electrical plug ins.
- Vehicle Kit Air Heater
- 2kW
- 12V
- Diesel
- Operator Switch
Kit Includes:
- 2 kW Air Heater
- Operating Switch
- Mounting Plate & Seal
- Wiring Harness
- Flexible Stainless Steel Exhaust 24mm
- Combustion Air Intake Tube 25mm
- Exhaust, Hose and “P” Clamps
- Hot Air Ducting 1M (3’) Length, Air Outlet Adjustable Vent, Hose Clamps 75mm
- Fuel Pickup Tube & Fuel Tube Hardware Kit
- Fuel Metering Pump
- Fuel Pump Holder
- Black Rubber Fuel Line, 0.5M (18”) 5mm ID
- “Z” Mounting Bracket
- Fuel Line (8m, ID 1.5mm, OD 5mm)
- Small Fuel Line Clamps, 9-11 mm
- All required hardware (nuts, screws, washers) for installation are provided in kit
Air Heater Performance Specifications:
Heating Mode: Super | High | Medium | Low
Heating Capacity: Super 2.0 kW/hr (6,825 BTUs/hr) | High 1.6 kW/hr (5,460 BTUs/hr) | Medium 1.3 kW/hr (4,436 BTUs/hr) | Low 0.9 kW/hr (3,071 BTUs/hr)
Fuel Consumption: Super 0.25 L/hr (0.07 US Gal/hr) | High 0.21 L/hr (0.05 US Gal/hr) | Medium 0.16 L/hr (0.04 US Gal/hr) | Low 0.10 L/hr (0.03 US Gal/hr)
Air Flow CFM: Super 49 | High 41 | Medium 28 | Low 20
Power Consumption watts: Super 34 | High 23 | Medium 13 | Low 9
Power Consumption at Start Watts: ≤ 100
Fuel Type: Diesel
Nominal Voltage: 12 Volt
Lower Voltage Limit: 10.5 Volts over 20 seconds
Upper Voltage Limit: 16.0 Volts over 20 seconds
Overheat Protection: 115° C (239° F)
Allowed Ambient Temperature: -40° C to 76° C (-40° F to 168° F)
Weight: 2.8 kg (6 lbs)
Above Specifications (± 10%)
Reviews
There are no reviews yet.